Installing the Standby server
Step 14. Other postinstallation tasks
Perform one or more of the following postinstallation tasks, if you have not
already done so for your contact center.
Changing your event viewer settings
Based on the size of your contact center, change the size of the Windows
Application Log file that holds events produced by the Contact Center
Multimedia application. For more information, see "Create Log reports" on page
1247.
Configuring SNMP (optional)
If you are using the Windows Simple Network Management Protocol (SNMP)
service to forward traps, you must perform these tasks:
Configure the Windows SNMP service on the server.
Select the types of events you want to forward to the Network Management
Service (NMS).
Configure the NMS.
For more information, see "Configure the Windows SNMP service on the
server" on page 1253.
Configuring security settings
Ensure that your security settings meet the requirements for your contact center.
For more information about configuring your security settings for the Standby
server, see "Use the Windows Server 2003 Security Configuration Wizard" on
page 1271.
948
Contact Center Multimedia/Outbound
Standard 7.16