Step 40. Configure The Administrators - Nortel Contact Center Multimedia Installation And Maintenance Manual

Migrating Contact Center 6.0 to a new server

Step 40. Configure the administrators

Note: You configured the user types during the configuration of your old
Contact Center Multimedia server, and the information was migrated to your
new Contact Center Multimedia server when you restored the database backup.
If you are not adding or changing any Multimedia user configuration, then
proceed to Step 41. "Configure hotdesking (optional)" on page 857.
Nortel recommends that you now change the default password from what is
published in this guide.
Any administrator can change all of the configuration properties in the
Multimedia Administrator application.
Changing the default password
You must change your default administrator password.
To change the default password
1 Log on to the Multimedia Administrator.
2 Expand General Administration.
854 Contact Center Multimedia/Outbound
Standard 7.16