Nortel Contact Center Multimedia Installation And Maintenance Manual page 1415

October 2007
4 Ensure that you can ping the Replication Server.
5 On the Replication Server, recreate the warm standby configuration on the
Replication Server with the new Active Server IP address using the
following steps:
a. Click Start > Programs > Nortel Contact Center > Replication
Server > Replication Server Management.
Result: The Replication Server Management dialog box appears.
b. Click Create.
Result: The Warm Standby Servers dialog box appears.
c. In the Primary CCMS box, type the name and Nortel server subnet IP
address for the Primary Server.
d. In the Secondary CCMS box, type the name and Nortel server subnet
IP address for the Secondary Server, and click OK.
Result: The Warm Standby configuration takes several minutes. At the
end of the process, the Initialize Standby CCMS Database dialog box
appears.
e. Back up the Active CCMS database and restore it on the Standby
Server. For more information about backing up and restoring the CCMS
database, see the Nortel Contact Center Manager Server Installation
and Maintenance Guide for the Standby Server.
f. Click OK.
Changing the Replication Server name
To change the Replication Server name, complete the following procedure.
On the Replication Server
1 Click Start > Administrative Tools > Services to shut down the following
Replication Server services:
Sybase REP_<Server Name>_RS
Sybase SQLServer_<Server Name>
Sybase BCKServer_<Server Name>_BS (if it is running)
CC Rep Service
2 Change the Replication Server name using the following steps:
Installation and Maintenance Guide
Change the names or IP addresses of servers
1415