Summary of Contents for Nortel Configuration Manager
Page 1
Contivity Configuration Manager 2.2 User Guide *314790-D_Rev_00* Part No. 314790-D Rev 00 December 2004 600 Technology Park Drive Billerica, MA 01821-4130...
Page 2
In the interest of improving internal design, operational function, and/or reliability, Nortel Networks Inc. reserves the right to make changes to the products described in this document without notice. Nortel Networks Inc. does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.
Page 3
30 days of purchase to obtain a credit for the full purchase price. “Software” is owned or licensed by Nortel Networks, its parent or one of its subsidiaries or affiliates, and is copyrighted and licensed, not sold. Software consists of machine-readable instructions, its components, data, audio-visual content (such as images, text, recordings or pictures) and related licensed materials including all whole or partial copies.
Page 4
12.212 (for non-DoD entities) and 48 C.F.R. 227.7202 (for DoD entities). Customer may terminate the license at any time. Nortel Networks may terminate the license if Customer fails to comply with the terms and conditions of this license. In either event, upon termination, Customer must either return the Software to Nortel Networks or certify its destruction.
Preface Welcome to Contivity Configuration Manager 2.2 User Guide. The Contivity Configuration Manager* application offers a solution for one of the most problematic areas of networking—configuration management. By taking advantage of the unique capabilities of the Java* programming language, the CCM system provides comprehensive, platform-independent management capabilities that revolutionize the approach to configuring networks.
Text conventions This guide uses the following text conventions: angle brackets (< >) bold Courier text braces ({}) brackets ([ ]) ellipsis points (. . . ) 314790-D Rev 00 Indicate that you choose the text to enter based on the description inside the brackets.
Example: If the command syntax is show ip {alerts|routes} show ip alerts or show ip routes both. Internet Protocol Open Shortest Path First Point-to-Point Protocol Simple Network Management Protocol Contivity Configuration Manager 2.2 User Guide is one , you enter either , but not...
Vervante at the How to get help If you purchased a service contract for your Nortel Networks product from a distributor or authorized reseller, contact the technical support staff for that distributor or reseller for assistance.
Page 21
(1-800-466-7835) to learn the telephone number for the nearest Technical Solutions Center. An Express Routing Code (ERC) is available for many Nortel Networks products and services. When you use an ERC, your call is routed to a technical support person who specializes in supporting that product or service. To locate an ERC for your product or service, go to the http://www.nortelnetworks.com/help/contact/...
Chapter 1 Starting a CCM client session Once you or the Contivity Configuration Manager (CCM) administrator starts the CCM server software, you can gain access to it in one of two ways. You can access it with either the CCM standalone client or the CCM client applet that runs in a Web browser.
Starting the standalone client The standalone client software must be installed on your system before you can start the client. If the standalone client has not been installed on your system, you can download the standalone client installation files from the Web client login page.
The default port is 9193.The Previous Servers list displays the host name and port number for CCM servers that the client computer last accessed. Click OK. After several seconds, the CCM window opens. See CCM main window” on page Figure Contivity Configuration Manager 2.2 User Guide “About the “About the...
Specifying a database item upon starting the client By default, the CCM standalone client starts with the Configuration Data folder selected and the Palette tab displayed. If you want to start the standalone client with another item in the database selected, and its properties displayed, you can use the jumpto client so that a device with a particular IP address is selected and its properties are...
Starting the Web client Note: The Web client is provided as a convenience for you to use while on the road or away from the office. For performance reasons, Nortel Networks recommends that whenever possible, you use the standalone client. See...
Figure 2 CCM Login dialog box—Web client Type your user name and password in the appropriate boxes. The characters in your password are displayed as asterisks. Click OK. After several moments, the CCM window opens. window” on page Note: The Java2 plug-in must be installed before you attempt to start the Web client.
Choose Server > Logon to request a connection to a new server. The CCM Login dialog box opens. Enter the UserID, Password, Host Name, and Port for the new CCM server. Click OK. The connection between the client and the new server is established. Contivity Configuration Manager 2.2 User Guide...
Resetting a CCM client session Sometimes a communication error can occur between the CCM server and the CCM client. If this happens, you can reset the CCM client to its initial state. To reset the CCM client: ➨ Choose View > Reset. Ending a CCM client session To end a CCM client session: ➨...
• “Using the Help system” on page 47 • “Entering data in required fields” on page 48 • “Changing CCM account information” on page 48 • “Specifying recipients for e-mail notification” on page 51 Contivity Configuration Manager 2.2 User Guide...
About the CCM main window The CCM main window contains a menu bar, a toolbar, and three distinct panes: • navigation pane • context-sensitive pane • message pane Figure 3 shows an example of the main window. Figure 3 CCM main window Menu bar Toolbar Navigation pane...
Depending on the permissions that the CCM administrator assigned to your account, you might have access to additional items in this folder. Figure 4 on page 34 shows the expanded Contivity Configuration Manager 2.2 User Guide Chapter 5,...
Figure 4 Expanding the Server Setup folder Items in the navigation pane can be individual items, for example a specific networking interface, or they can be groups of other items. For example, the Configuration Data folder might contain a folder that groups together all devices in a geographical area.
You can specify, add, and launch any application from CCM that resides on the client workstation. • Web Links—A repository of frequently used URLs and e-mail addresses. You can add URLs and addresses to this tab. for more information. Contivity Configuration Manager 2.2 User Guide...
Note: If the Wizards tab does not appear in the context-sensitive pane upon startup, that may mean that you have not been granted access to the wizard functionality. See your network administrator for further information. Adding URLs and e-mail addresses You can add URLs and e-mail addresses to the Web Links tab.
Web Links tab. See Figure 8 on page You can use the buttons along the bottom of the Web Links tab to activate the selected URL, modify it, or delete it. username@server mailto: Contivity Configuration Manager 2.2 User Guide . You .com...
Figure 8 Web Links tab with URLs Parameterized application launch CCM provides you the means to launch any local application from CCM via the Applications tab. For each application, you specify a description and a command-line string with parameters. Use the Modify and Delete buttons to manage the application list.
A progress window opens with each operation listed in a progress bar in the table. To open the progress window: Start the CCM client. Select View > Progress Window. The progress window opens. See on page Figure 9 shows the pane with a typical network Contivity Configuration Manager 2.2 User Guide Figure 10...
Figure 10 Progress window CCM menus and toolbar The CCM main window contains a menu bar and a toolbar. Menu bar Table 3 describes the CCM menu bar. More information about individual menu items can be found in the following chapters. Table 3 CCM menu bar Menu File...
Renames the current selection. Search Starts the Search tool. You can specify various search criteria such as field names and field values. Telnet Starts a Telnet session. Displays an audit log of the selected devices. Contivity Configuration Manager 2.2 User Guide Table 4...
Pop-up menus CCM includes pop-up menus from which you can quickly access context-sensitive menu commands. To display a pop-up menu, right-click in the navigation pane. Like other CCM menus, the menu choices that are available on the pop-up menu depend on which item you have selected in the navigation pane. Figure 11 shows an example of a pop-up menu that appears when a networking device is selected.
The Look and Feel tab is shown on the left side of Choose a style from the Select Look and Feel box: • Metal (Java style, the default) • CDE/Motif (Common Desktop Environment/Motif style) • Windows (Microsoft style; not available on Solaris platforms) Figure Contivity Configuration Manager 2.2 User Guide...
Click a button: • OK sets the selected style and closes the Preferences dialog box. • Apply sets the style and leaves the dialog box open. • Cancel closes the dialog box without changing the window style. Changing colors and fonts Each window display style has default colors and fonts.
To select Tab View ➨ Choose View > Tab View. Preferences dialog box. to the main Colors/Fonts pane (right side of started making changes. (Figure 14, left side): Contivity Configuration Manager 2.2 User Guide Figure 12 on page 43).
To select Desktop View ➨ Choose View > Desktop View. You can select these views regardless of the current window style selection. Figure 14 shows the two views with the Metal window style selected. Figure 14 Tab and desktop views of context-sensitive data Tab View Displaying field-level Help Specific fields in the Properties tab have a property tip.
Click in the navigation pane. Press [F1]. The Help topic for the navigation pane opens. See Click the question mark. Click an entry field. Help message for this field. Figure 16 on page Contivity Configuration Manager 2.2 User Guide...
Figure 16 Help topic for the Navigation pane Entering data in required fields In the context-sensitive pane, fields that are highlighted in yellow indicate required fields. These required fields must be filled out fully or any changes made to the screen will not export correctly. Changing CCM account information Your CCM user account includes a user name and a password.
Type your new account information in the appropriate fields. If you change your password, be sure to press [Tab] and then type your password again in the Confirm Password message box provides an example of user account information. (Figure 17). Contivity Configuration Manager 2.2 User Guide...
Changing your password To change your CCM password: Choose Tools > Set Login Password. The Change Login Password dialog box opens. See Figure 18 Change Login Password dialog box In the Current Password field, type your password. In the New Password field, type your new password. Press [Enter] or [Tab].
Type an e-mail address in the text box. See Figure 20 E-mail Addresses tab Click Add. The address moves to the address list. Repeat step 3 Click OK. step 4 until you have added all the e-mail addresses. Contivity Configuration Manager 2.2 User Guide Figure...
52 Chapter 2 Getting started with CCM The Notification tab on the job setup dialog boxes is populated with the addresses you entered. To select e-mail recipients, highlight the desired addresses and move them to the Recipient List using the >> button. When scheduled jobs are completed, they will receive e-mail notification.
Selecting items You can select one or more items in the navigation pane. The selected item determines what appears in the context-sensitive pane, and it receives the actions of any tasks that you perform in the context-sensitive pane. For example, if you select a device in the navigation pane, the context-sensitive pane displays protocols and interfaces for that device.
The Shortcuts dialog box opens. It displays a table that includes the name and location of the selected item and the name and location of all of its shortcuts. Figure 22 shows some examples of Contivity Configuration Manager 2.2 User Guide...
Figure 23 Figure 23 Shortcuts dialog box Deleting items To delete an item from the database, you must have write access to the item. Note: When you delete an item, CCM automatically deletes any shortcuts for that item. To delete an item from the CCM database: In the navigation pane, select the item that you want to delete.
• Choose Edit > Rename. • On the toolbar, click Rename. • Right-click the item, and then choose Rename from the pop-up menu. Figure 25 on page 58, Contivity Configuration Manager 2.2 User Guide in one of the...
Figure 25 Rename dialog box In the New item name box, type a new name for the item. If you want to rename shortcuts to this item, click the Rename references check box. Click OK. The navigation pane displays the item’s new name. Sorting items By default, when you add an item to the CCM database, the navigation pane displays the item at the top of hierarchy.
Because the CCM server supports concurrent users, it is possible that more than one user might attempt to change the configuration of the same item at the same time. For this reason, Nortel Networks recommends that you lock an item before you make any changes to that item’s configuration.
If you have write access, you can lock and unlock either a single item, a group of items, or an entire subtree of items. A subtree is an item and all of its associated subitems; for example, a device and all of its interfaces, protocols, and user-defined items.
Table 5 Default access permissions Access group Owner—Administrator Group—Administrator Everyone The following sections describe how you can view and modify an item’s access permissions. Privilege Read/Write Read Read/Write Contivity Configuration Manager 2.2 User Guide Table 5 lists the...
Viewing access permissions To view a database item’s access permissions: In the navigation pane, click the item. Open the Permissions tab in one of the following ways: • Choose View > Context Panes and select Permissions. • Right-click and select Permissions from the pop-up menu. The Permissions tab opens, displaying the item’s access permissions.
In that the Everyone Write setting is dark gray, indicating a difference in access privileges among the selected items. “Viewing access permissions” on “Viewing access permissions” on Figure 28 on page Contivity Configuration Manager 2.2 User Guide 64, notice...
“Exporting configuration files” on page 80 • “Configuring devices with a Telnet connection” on page 83 For information about managing configuration files and image files, see Chapter 5, “Managing image and configuration files,” on page Contivity Configuration Manager 2.2 User Guide...
Adding configurations to the database You can add configurations to the database in the following ways: • Create a new configuration. • Import a configuration from a network device. • Import a configuration from a TFTP server directory. Creating a new configuration To create a new configuration, you add the configuration from the CCM palette.
Adding a new configuration When you select the Configuration Data folder in the navigation pane and click the Palette tab, a list of templates for Nortel Networks is displayed. See Figure 29 Device templates in the Palette tab To add a configuration to the network database: In the navigation pane, select the Configuration Data folder or one of its subfolders.
Importing configurations from network devices You can import configuration data directly from Nortel Networks devices on your network. Importing a device from the network requires you to enter the device’s IP address (or associated name). Some devices also require a community string and one or more passwords.
In the Device’s IP address or hostname box, enter the IP address or name of the device whose configuration information you are importing. step 3, you are first step 3, you are not prompted for the Contivity Configuration Manager 2.2 User Guide Figure 31. If...
Enter the passwords. If passwords are enabled for the device, the Import tab includes one or more password boxes. If the box is empty, you must enter and confirm a password. Figure Figure 32 Import from Network dialog box—Import tab Click Import.
Click Add List. (Note that if you are running the CCM Web client, the Add List button is not available). The Import List dialog box opens. See Figure 33 Import List dialog box Contivity Configuration Manager 2.2 User Guide Figure...
Click Browse. Select the file you edited in Import from Network dialog box is updated with the information from the file. Alternatively, you can type or paste the device information directly in the Import List Dialog box, and then click OK. In the Import From Network dialog box, shown in Import.
On the toolbar, click Import, and then click TFTP in the Import Source dialog box. In the TFTP server list, select Configured TFTP Server (the default selection). directory”. If you are importing “Importing from a remote TFTP directory” on Contivity Configuration Manager 2.2 User Guide...
In the Files in TFTP directory box, select the file(s) you want to import. If the list is empty, verify the location of the TFTP server directory and copy the files you want to import to the directory. In the Select a driver list, optionally select the driver. By default, CCM detects the file type and selects the right driver.
See Chapter 6, “Scheduling CCM Figure 35), type the name of a (Figure 35). Repeat operations” for more information. Contivity Configuration Manager 2.2 User Guide step 4 through...
Archiving configurations You use this operation to save an existing configuration to the CCM configuration archive. This operation is useful since it preserves the current state of a configuration, prior to you modifying it. Thus, if the modifications you make are incorrect, you may revert back to one of the archived configurations.
This second tab bar always contains at least the Basic tab. Depending on the complexity of the configuration data for an item, items might have additional tabs. Items with complex configuration data require more tabs than items with simple configuration data. Contivity Configuration Manager 2.2 User Guide...
Note: Tab bars “wrap” in the context-sensitive pane, so you might see what appears to be more than two tabs bars. Nevertheless, any “third” tab bar (and so forth) that you see is part of the second tab bar. If you prefer to see all the tabs on a single line, increase the width of the context-sensitive pane.
Note: You may wish to archive the current configuration before you start this process so that you can return to it later. Figure Contivity Configuration Manager 2.2 User Guide...
Multi-value property fields For some devices properties, you can enter a variable number of values, or sets of values. Where this is the case, a plus sign (+) appears under the field or row heading. These fields are referred to as multi-value property fields. You click the plus sign to add a new row.
Choose Configuration > Export > To Network. • On the toolbar, click Export, and then choose Network. The Export To Network dialog box opens. See Figure 41 Export To Network dialog box “Re-importing configuration data” on page Figure Contivity Configuration Manager 2.2 User Guide 112.)
To see the configuration file that will be exported to the device prior to exporting it, click Preview. The Preview dialog box opens. See Figure 42 Preview dialog box Click Export. This button is available on both the Preview and the Export dialog boxes.
You can start a Telnet session from CCM regardless of whether your client computer supports Telnet. A Telnet session started from CCM is functionally identical to a Telnet session started from your computer. Figure 42 on page Contivity Configuration Manager 2.2 User Guide...
To establish a Telnet connection: Open a Telnet window in one of the following ways: • Choose Tools > Telnet. • On the toolbar, click Telnet. The Telnet window opens. Choose Session > Connect. The Open Telnet Session dialog box opens. See Figure Figure 44 Open Telnet Session dialog box In the Connect To box, type the name or the IP address of the device to which...
When you leave a field in the CCM GUI or click a button, the “transaction” is committed to the database at that point. It is not necessary to explicitly “save” the configuration. Nortel Networks recommends, however, that you save configurations if you think you might want to rollback to an earlier configuration or recreate a network configuration.
Information in this chapter is organized in the following way: • “File Management Overview” on page 88 • “Archiving files” on page 88 • “Updating configuration file archives” on page 97 • “Sending image and configuration files” on page 98 Contivity Configuration Manager 2.2 User Guide...
File Management Overview In CCM, file management operations involve moving configuration and image files to and from devices on the network. The top-level File Management folder in the navigation pane includes device representations along with the configuration file and image files for the devices. Archiving and sending configuration information is similar to the import and export operations described previously in except that the system does not parse the information.
In the navigation pane, select the Images folder under the File Management folder. Open the Archive From TFTP dialog box by choosing File > Archive > Image From TFTP. In the TFTP server list, select Configured TFTP Server (the default selection). Contivity Configuration Manager 2.2 User Guide Figure 45, by...
In the Files in TFTP directory list, select the files you want to archive. If the list is empty, verify the location of the TFTP server directory and copy the files you want to import to the directory. In the Select a driver list, optionally select the driver. By default, CCM detects the file type and selects the right driver.
CCM immediately imports the listed image files. If you have many image files, you might want to schedule the import for a later time. See “Scheduling CCM operations Figure 46), type the name of (Figure 46). for more information. Contivity Configuration Manager 2.2 User Guide Chapter 6,...
Archiving a configuration file from a network device Each archived configuration file entry contains a label, date, size, and name and appears as a row in the table properties of the archived configuration object under each managed device. You can archive configuration files directly from devices on your network. Archiving configuration files from the network requires you to enter the device’s IP address (or associated name).
TFTP server directory. You can do so from the default TFTP directory or from a remote TFTP directory. To archive configuration files: In the navigation pane, select the File Management folder. step 3 on page Chapter 6, “Scheduling CCM Contivity Configuration Manager 2.2 User Guide step 1...
Open the Archive Config From TFTP dialog box, shown in choosing File > Archive > Config From TFTP. Figure 48 Archive Config From TFTP (local server) dialog box If you are archiving TFTP images located in the CCM server’s default TFTP directory, see directory”.
TFTP directory is replaced by a file name box. See Chapter 6, “Scheduling CCM for more information. Figure 49 on page Contivity Configuration Manager 2.2 User Guide...
Figure 49 Archive Config from TFTP (remote server) dialog box In the TFTP Server’s IP address or hostname box, type the remote host’s name or IP address. From the Select a driver list, optionally select the driver. By default, the software detects the file type and selects the correct driver.
Select the configuration file archives you wish to update. Click Update. CCM then goes ahead and updates the database archive with the current configurations you have specified. Figure 50 Update dialog box Figure 50 shows the Update dialog box that appears Contivity Configuration Manager 2.2 User Guide...
Sending image and configuration files Image and configuration files are grouped by device type in the File Management folder. You can send configuration files to: • A network device • The TFTP server You can send image files to network devices only. The process of sending image files to a network device is explained in image files to a network “Sending configuration files to a network device”...
If you have many image files, you might want to schedule the operation for a later time. See Chapter 6, “Scheduling CCM operations for more information. Contivity Configuration Manager 2.2 User Guide...
If you select Choose, you must then pick a label from the provided list. Click OK and the Send Config To Network Dialog box appears. shows an example of the device-specific information you are prompted for with a Nortel device. 314790-D Rev 00 Figure...
If you select Choose, you must then pick a label from the provided list. Click OK. The Send Config To TFTP Dialog box opens. See page 102. Chapter 6, “Scheduling CCM operations Figure 52 on page Contivity Configuration Manager 2.2 User Guide 100, Figure 54 on...
Figure 54 Send Config To TFTP Dialog box Enter the TFTP server name and the TFTP file name you are sending in the designated boxes. Click Send. CCM sends the configuration file and provides you with a status box as it does so. If you have many configuration files, you might want to schedule the operation for a later time.
Scheduling overview CCM provides an ordered scheduler which allows you to schedule multiple operations and then schedule the order of those operations sequentially. You can also specify that an operation may or may not occur based on the return status of the previous operation.
In the Run this task area, select “at the time scheduled below.” In the schedule box, click the arrow on the run times field. A calendar window opens. See Figure Figure 56 Calendar window Figure 55 Contivity Configuration Manager 2.2 User Guide shows an...
Specify a day and time. Use the drop-down lists to change the values in the month, year, hours, minutes, seconds, and AM/PM fields. When the time is correctly set, click the arrow in the time field to close the calendar window. If you want to repeat this job, select the “and repeat every”...
When CCM runs a job it generates log messages, which you can view. To view log messages: In the navigation pane, click the job for which you want to view messages. In the context-sensitive pane, click the Properties tab. The Schedule tab opens. “Deleting jobs” on page 109. Contivity Configuration Manager 2.2 User Guide...
Click Log > Edit. The Edit dialog box displays the messages that were generated when the job was run. Each message includes the time the message was generated. If the job failed, a message detailing the reason for the failure appears in the log. Chaining multiple scheduled operations To chain an operation to the success or failure status of another operation, do the following:...
(name, type of operation, and so on). Deleting jobs You can delete previously scheduled jobs. To delete a job: In the navigation pane, select the job that you want to delete. Right-click, and then choose Delete from the pop-up menu. Contivity Configuration Manager 2.2 User Guide...
“Synchronizing CCM data and device configurations” on page 112 • “Searching the configuration database” on page 116 • “Managing large transactions” on page 120 • “Monitoring database connections” on page 121 • “Monitoring database activity” on page 121 Contivity Configuration Manager 2.2 User Guide...
Synchronizing CCM data and device configurations CCM is a very powerful tool; however, its power and usefulness is diminished if the device data in its database is not synchronized with the configuration of the devices in the network. Therefore, CCM includes several features that allow you to easily synchronize the database configuration data with the physical device configuration: •...
In the navigation pane, select the database item that you want to compare. Choose Configuration > Compare > With Network. The Compare with Network dialog box opens. See for more information. Figure 60 on page 114. Contivity Configuration Manager 2.2 User Guide...
Figure 60 Compare with Network dialog box Click Compare. Alternatively, you can schedule the comparisons for a later time. The Compare operation begins, and after several seconds, the Differences report window, shown in information appears on the left and the actual device configuration data appears on the right.
Figure 61 Differences report Saving comparison results To save the results of a comparison: In the Differences dialog box, click Save. The Save dialog box opens. See Figure 62 on page 116. Contivity Configuration Manager 2.2 User Guide...
Figure 62 Save dialog box Choose a destination for the report. You can either select an existing folder or create a new one. A new folder appears inside the selected folder. Click OK. The report is named Differences with the time stamp appended. Searching the configuration database You can use the Find feature to search the CCM database.
Specify which fields you want to search—item names, help topics, field values, and field names. Click the Look In tab and specify which folders or items you want to search. Figure 63, in one of the following ways: Contivity Configuration Manager 2.2 User Guide...
Click the More Options tab to specify advanced search options. “Advanced search options” options. Click Find. As the search progresses, the title bar displays the number of items searched and number of matches, and the matches are listed. You can jump to a listed item by double-clicking it.
To save the search results: Click the Find tab. Select the items from the search results you want to save. Click Save Selected. The Save search results dialog box opens. See on page 120. Contivity Configuration Manager 2.2 User Guide Figure 65...
Figure 65 Save Search Results dialog box Choose the destination for the search results. You can either accept the default destination (Saved Search Results) or select another existing folder. If you create a new folder, it appears inside the selected folder. Click OK.
Once you have generated a log, you can sort it by date or by user. You can also jump from an item in the log to the item in the navigation pane. Contivity Configuration Manager 2.2 User Guide...
122 Chapter 7 Managing and monitoring CCM Generating an audit log for all items To generate the audit log for the all items in the database: ➨ Choose Tools > Audit Log > Entire Log The Generating Audit Log window opens; it displays the progress of the generation of the audit log.
By default, the entries in an audit log are sorted by date, in descending order. However, you can sort the log by user. You can also change the sort order from descending to ascending. “Generating an audit log for all items” on Contivity Configuration Manager 2.2 User Guide...
To specify the sort key for an audit log: Generate an audit log. “Generating an audit log for all items” on page 122 audit log for a selected item” on page In the Audit Log window, click the following column headings: •...
Chapter 8 Using CCM Wizards Contivity Configuration Manager offers a variety of wizards to streamline routinely performed tasks. Wizards walk you through the necessary steps to configure certain aspects of your network. The following wizards are included in CCM 2.1: •...
Multi-Device Configuration Wizards The Multi-Device Configuration wizard allows you to configure system settings on one or many Contivity or Contivity Branch Access devices. If a single device is selected, the changes will apply to the driver selected. If the Configuration Data folder is selected, the changes will apply to each switch listed under the folder.
Contivity devices and click Next. This screen allows you to configure tunnel type which controls each of the supported tunneling protocols on Public and Private interfaces. Figure 68 Allowed Services panel Figure 68), configure the allowable services on Contivity Configuration Manager 2.2 User Guide...
In the third panel (see Authentication Protocol Settings. When finished, click Next. Through these protocols, you control which management protocols can be accessed directly from a private LAN. By enabling Management Protocols, you can access the gateway for management purposes in a nontunneled environment, if the filter permits.
Figure 71 on page management systems that are authorized to send SNMP Get requests to the gateway. The gateway will ignore all other requests that come from other systems. When finished, click Next. 130), designate the SNMP Contivity Configuration Manager 2.2 User Guide...
Figure 71 SNMP Get Host panel In the next panel (see which SNMP trap messages can be sent. When finished, click Next. 314790-D Rev 00 Figure 72 on page 131), designate those systems to...
Figure 72 SNMP Trap Settings panel 10 In the next panel (see Figure 73 on page Accounting Settings. When finished, click Next. Note: Internal RADIUS Accounting is enabled by default on Contivity devices. 132), configure the RADIUS Contivity Configuration Manager 2.2 User Guide...
RADIUS servers. When finished, click Next. Figure 75 RADIUS Authentication Settings (2) 13 In the Report options panel (see options and click Finish. Figure 76 on page 134), enter the report Contivity Configuration Manager 2.2 User Guide...
Figure 76 Report options panel Multi-Device Configuration: CBA This wizard walks you through configuration of system settings for Contivity Branch Access (Contivity 100-400) devices. To run the wizard: In the navigation pane, select the Configuration Data folder or a Contivity Branch Access device.
Figure 77 Multi-Device Configuration:CBA wizard panel In the second panel (see parameters and click Finish. Figure 78 SERVICES Group Configuration panel Figure 78), configure the SERVICES Group Contivity Configuration Manager 2.2 User Guide...
The Contivity Reports wizard guides you through report generation. The reports generated by the wizard use database data. To ensure accurate report results, Nortel Networks recommends that you re-import your devices before running this wizard. Note: This wizard is only available to Contivity devices.
Make changes to the User ID and Password that CCM will use for import and export operations (see Changes made will only apply to CCM. Figure Figure 81 on page 138) and click Next. Contivity Configuration Manager 2.2 User Guide 80) and click Next.
Note: If you are modifying the Administrator ID and password in the previous screen, Nortel Networks recommends that you use this same ID and password for imports and exports. Figure 81 Import/Export panel Make changes to the Administrator and User Passwords (see click Next.
Advanced Settings. Figure 83 Device Backup panel Figure 83), choose whether or not to configure the step 6 on page 140. The Advanced Settings Contivity Configuration Manager 2.2 User Guide...
Configure the Basic parameters for Server 1 (see Do the same for Servers 2 and 3 in the following panels, clicking Next after configuring each server. Note: If you choose to configure a server, ALL fields must be filled out. All unconfigured fields will be deleted.
Note: Data changes from this wizard will remain local to CCM and all data collected through the wizard will be applied to the local CCM database only. You must export the devices after running this wizard for the changes to take effect on the network. Contivity Configuration Manager 2.2 User Guide...
License Management wizard The License Management wizard allows you to install and remove keys on one or more devices. The available options are: • Install/Remove Routing Key • Install/Remove Tunnel Key • Install/Remove Firewall Key Note: This wizard is only available to Contivity devices. To run this wizard: In the navigation pane, select the Configuration Data folder or a device.
Select which keys you want to install (see Figure 88) and click Next. Note: You must restart after installing Tunnel keys. Figure 87 Install keys panel Figure 88 Remove keys panel Figure 87) or remove (see Contivity Configuration Manager 2.2 User Guide...
Shutdown wizard The Shutdown wizard allows you to apply system shutdown and restart options to one or more devices. Note: This wizard is only available to Contivity devices. To run this wizard: In the navigation pane, select the Configuration Data folder or a device. In the context-sensitive pane, click the Wizards tab.
Figure 90 System shutdown options Select the desired boot options (see Figure 91 Boot options Select detail information (see Figure 91) and click Next. Figure 92 on page 146) and click Finish. Contivity Configuration Manager 2.2 User Guide...
Figure 92 Details panel Version Management wizard This wizard allows you to perform software version management on your Contivity devices. Software versions are sent from an FTP server to one or more devices in a single operation. Note: This wizard is only available to Contivity devices. To run this wizard: In the navigation pane, select the Configuration Data folder or a device.
Figure 93 FTP Server panel Select the directory that contains the appropriate software version (see Figure 94). Click Next. Figure 94 Directory selection panel Contivity Configuration Manager 2.2 User Guide...
Select the devices from the Configuration Data folder that will receive the new software version (see select the devices to receive the software version. Click Next. Figure 95 Device selection panel Enter the IP addresses of the devices that will receive the new software version (see 314790-D Rev 00 Figure...
Verify the device access information listed for each device (see page 150). Fill in any missing access parameters, add additional devices, or select the reboot option. When finished verifying the information, click Next. Contivity Configuration Manager 2.2 User Guide Figure 97 on...
Figure 97 Device verification summary 10 From the Summary panel, click Finish. The device should receive the new image and display the new image upon restart. Tunnel Guard wizard The Tunnel Guard wizard allows you to copy a Configuration Security Policy from a single Contivity device to multiple Contivity devices running v4.8 or later.
Select from the list of policies (see The Overwrite option replaces an existing rule on the destination device with the same name as the one being copied. Figure Figure 99 on page 152) and click Next. Contivity Configuration Manager 2.2 User Guide...
Figure 99 Tunnel Guard Wizard (2) In the Destination Devices screen (see all of the destination devices displayed in the navigation tree. The device’s parameters should automatically populate in the required fields. 314790-D Rev 00 Figure 100 on page 153), select one or...
Note: The Tunnel Guard wizard cannot copy policies with rule expressions containing “and/or.” All of the rules in the expression must be defined on the target device for the wizard to copy rule with “and/or” expressions. Contivity Configuration Manager 2.2 User Guide...
NAT Policy Conversion wizard The NAT Policy Conversion wizard allows you to convert the older read-only NAT sets to the newly redesigned NAT policies. The completion of this NAT Policy Conversion wizard results in the following: • All IP Ranges/Hosts related to the older format NAT sets will be created as Network Objects within Firewall/NAT.
Figure 101 NAT Policy Conversion wizard (1) Enter any changes to the NAT policy names (see Figure 102 NAT Policy Conversion wizard (2) Select your reporting parameters and click Finish. Figure 102) and click Next. Contivity Configuration Manager 2.2 User Guide...
Page 157
113 reimporting 112 searching 116 configurations archiving from a network device 92 archiving from a TFTP server 93 from the default server 94 from the remote server 95 creating new 66 Contivity Configuration Manager 2.2 User Guide...
Page 158
editing 78 exporting to a network device 81 to a TFTP server 82 importing from network devices 68 from network devices, device list 70 from network devices, direct import 68 from TFTP server 72 from TFTP server, default server 73 from TFTP server, remote server 74 saving files database transactions and rollback 85...
Page 159
112 technical publications 20 technical support 20 templates for devices 67 text conventions 18 toolbar 41 toolbar buttons, defined 41 understanding device properties 77 update, database from network device 112 Contivity Configuration Manager 2.2 User Guide...
Page 160
160 Index URLs addresses, adding 36 user account information 49 Web client, starting 27 314790-D Rev 00...