Nortel Contact Center Multimedia Installation And Maintenance Manual page 1441
Nortel contact center multimedia software: user guide
Hide thumbs
Also See for Contact Center Multimedia:
- User manual (282 pages) ,
- Release note (88 pages) ,
- Scripting manual (812 pages)
Table of Contents
Advertisement
October 2007
4
Click Accept.
5
From the Start menu, select Control Panel.
6
Right-click Network Connections.
7
Right-click the LAN connection of the Nortel server subnet network
interface card, and then click Properties.
8
Select Internet Protocol (TCP/IP), and then click Properties.
9
Enter the new IP address, and then click OK.
10
In the Properties window, click Close.
Configure the Contact Center Manager Server with the new IP
address
Complete the following procedure if you change the Nortel server subnet IP
address of the Active server, the Standby server, or the Replication server.
1
From the Start menu, choose All Programs > Nortel Contact Center >
Manager Server > Server Setup Configuration.
Result: The following dialog box appears. This dialog box remains open for
20 to 30 seconds.
If you have a co-resident License Manager, an Information dialog box
appears.
2
If the Information dialog box appears, click Continue.
Result: The Server Setup Configuration Utility initializes.
Installation and Maintenance Guide
Change the names or IP addresses of servers
1441
Advertisement
Table of Contents
