Nortel Contact Center Multimedia Installation And Maintenance Manual page 931

October 2007
48 For CCMMOPSUSR, allow the following permissions: Read & Execute,
List Folder Contents, Read, and Write.
49 Click Apply.
50 Click Add to add a new user.
51 In the Enter the object names to select box, type IUSR_<Servername>,
where <Servername> is the name of the Standby server.
52 Click OK.
53 For the IUSR account, select the following permissions: Read & Execute,
List Folder Contents, Read, and Write.
54 If the SYSTEM security folder does not exist, in the Enter the object name
to select box, type SYSTEM.
55 Select the check box under Allow and beside Full Control.
56 Click Apply to save the changes to permissions for this folder.
57 Click OK to complete the setup of the Inbound Attachments Share.
Setting up an outbound attachment shared location
1 Open Windows Explorer and browse to the drive you selected for your
Contact Center Multimedia database.
2 Open X:\Nortel\Contact Center\MailAttachments, where X is the drive
where you installed your Contact Center Multimedia database.
3 Locate the folder Outbound.
4 Right-click the Outbound folder, and select Properties.
Installation and Maintenance Guide
Installing the Standby server
931