2.6.5.2 Machining Program Condense
The storage efficiency of the machining programs registered in memory may be lowered when
correction such as data deletion or addition is made. When memory is used wastefully, the
condense function can be used to move the intermediate blank portions forward and increase the
remaining number of characters that can be registered.
Set 2 in # ( ) for the condense command. To execute the condense function for all machining
programs registered in memory, set ALL in first 0 (
To condense all work programs
registered in memory:
# (2) O (ALL) → O (
Press the
1) Condense is started and the message
2) The time required for condense varies
Downloaded from
ManualsNet.com
2. Screen Operation of A985GOT
)
key.
INPUT
CONDENSE EXECUTION is displayed
in the message field.
depending on the total number of the
registered machining programs. Do not
turn off the NC power during condense
execution.
search engine
2.6 Data In/Out
).
I - 160