Mitsubishi Electric MELDAS C6 Instruction Manual page 186

(2) Tool data (When #(10) (
s
Operation
Input (#1)
Compare
(#2)
Output (#3)
(3) Parameter, common variable, auxiliary axis parameter, history data
(When #(10) and (3), (5), (28), or (60) are set)
s
t
Operation
Input (#1)
Compare
(#2)
Output (#3)
(Note) The history data cannot be input or compared.
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
2) is set)
: Eight or less alphanumeric setting, extension
(Extension unique to each data is automatically added)
Basic setting # ( 1) (File name in ATA card) (
Single file #( 1) (
designation
Basic setting # ( 2) (File name in ATA card) (
Single file #( 2) (
designation
Basic setting # ( 3) (File name in ATA card) (
Single file #( 3) (
designation
: Eight or less alphanumeric setting, extension (may not include extension in some cases)
: Twelve or less alphanumeric setting
Basic setting # (1) (File name in ATA card) (
Single file #( 1) (
designation
Basic setting # (2) (File name in ATA card) (
Single file #( 2) (
designation
Basic setting # (3) (File name in ATA card) (Comment character string)
Single file #( 3) (
designation
search engine
2.6 Data In/Out
Setting method
s) ( ) Inputs file s from the ATA card to the NC memory.
s) ( ) Compares file s in the ATA card with the NC
memory data.
s) ( ) Outputs the NC memory data to the ATA card as
file s.
Setting method
s) ( ) Inputs file s from the ATA card to the NC memory.
s) ( ) Compares file s in the ATA card with the NC
memory data.
s) ( t) Outputs the NC memory data to the ATA card as
file s.
Outputs comment t to output file header.
I - 171
)
)
)
)
)