Clear Of All Tool Life Data (Head, Next, Group List Screen - Mitsubishi Electric MELDAS C6 Instruction Manual

(Refer to "2.3 (I) Tool Offset
(L system)" for L system.
Set "11" in # (
INPUT
(3) Data change
(4) Deletion in group units
2.3.3.4 Clear of All TOOL LIFE Data (HEAD, NEXT, GROUP LIST Screen Page 1)
To clear all data, select the HEAD, NEXT, GROUP LIST screen and press
INPUT
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
To register data exceeding the number
of data pieces that can be displayed
on a screen, set the # number only.
New data can be registered.
), then press the
key.
1) Display the TOOL LIFE data screen for the group in which the tool whose data is to be
changed is registered.
2) Set the # number of the data to be changed and new data in given parenthesis pairs of the
setting area, then press the
3) After setting, the # number is incremented by one and is set in setting area (
4) To change data under # number not displayed on the screen, change the screen by using
NEXT BACK
the or
5) By changing a registered tool number to 0, the tool can be deleted.
To delete all data in one group, select the TOOL LIFE data screen for the group to be deleted
and press the SHIFT key,
.
search engine
2.3 (II). Tool Offset (M system)
INPUT
key.
key or setting the number in setting area # (
CAN
INPUT
then .
C.B
I - 93
).
).
CAN
SHIFT key, , then
C.B