Mitsubishi Electric MELDAS C6 Instruction Manual page 311

3)
4)
5)
6)
7)
Downloaded from ManualsNet.com
3. Screen Operation When Using a Panel Computer
3.7 Realtime Wave Screen (For only the panel computer)
Press TIME/Div menu to display the
setting screen.
Set "100" as TIME/DIV value.
Press Trigger menu to display the
setting screen.
Set as follows;
TriggerCh: "CH1"
TriggerMode: "Repeat"
TriggerType: "X device"
TriggerLevel: "0x13"
TriggerEdge: "Off->On"
PreTrigger: "500"
StopType: "X device"
StopLevel: "0x13"
StopEdge: "On->Off"
Press START button to start sampling.
Waveform display starts at the time
when X device 0x13 is turned ON.
Waveform display stops when:
•X device 0x13 is turned OFF.
•START button is pressed again.
•30 seconds have passed since
waveform display started.
search engine
Repeat
X device
Off->On
Y device
On->Off
I - 296
SpeedFB
SpeedFB