Mitsubishi Electric MELDAS C6 Instruction Manual page 413

(5) Example of data input operation
Confirm that the user PLC is
stopped.
Connect the input device.
Call out the data input screen, and
enter the compare mode.
# (10) data (
1) The compare mode is canceled
Set 9 9 in # setting area.
# (99) DATA (
Press
1) The compare will start, and the
2) When the data is compared
3) If a compare error occurs, the
Downloaded from ManualsNet.com
9.2 Data Input/Output by RS-232C
2)
INPUT
when the screen is changed,
and the input mode will be
validated. Thus, the mode must
be set again.
)
.
INPUT
data being compared
"COMPARE EXECUTION" mes-
sage will display.
The No. of the data will display
in the data setting area.
normally to the end and the end
code % (EOR) is read in, the
message "COMPARE COM-
PLETE" will display.
message "E35 COMPARE
ERROR" will display, and the
operation will be stopped.
search engine
9. Maintenance Functions
and
III - 64