Function Outline - Mitsubishi Electric MELDAS C6 Instruction Manual

2.5.1 Function Outline

(1) Function outline
(2) Display when the screen is selected
(3) Fixed cycle program edit
(4) Editing macro operators
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
When the function selection key
The EDIT screen enables you to add, delete, or change the machining program contents stored
in memory. It also enables you to register a new program number in memory and prepare a
new program on the screen.
The MDI screen enables you to set, correct, or erase MDI data. It also enables you to register a
program prepared as MDI data in memory as a machining program.
EDIT
When the key is first pressed after the power is turned on, the MDI screen appears.
MDI
To edit a machining program on the EDIT screen, use the menu key to change the screen. No
programs to be edited are called on the initial edit screen. Perform
operation. To edit a program already registered in memory, perform
register a new program in memory, perform
If the MDI screen is selected, MDI data can be entered as it is without operation such as a
search.
EDIT
If screen operation is interrupted and any other function is executed, the previous
MDI
screen selected (MDI or EDIT) will appear and the previous data will be displayed by again
EDIT
selecting the screen. Then, the data input or edit operation can be continued.
MDI
To edit a fixed cycle program, set a given parameter.
The EDIT screen can be used to edit a fixed cycle program by setting 1 in parameter #1166
"fixpro".
If a character string that matches a macro operator exists in the machining program (including a
comment statement), it is automatically converted into the corresponding intermediate code
during editing. This may cause a string different from that entered to be displayed during
editing.
(Example) ATN ATAN
SQR SQRT
RND ROUND
search engine
2.5 Program
EDIT
is pressed, the EDIT or MDI screen appears.
MDI
MAKE
operation.
I - 111
MAKE
SEARCH
or
SEARCH
operation. To