Mitsubishi Electric MELDAS C6 Instruction Manual page 158

When
completed, % is displayed before indicating
the next program.
Also for each of the second and succeeding
programs, % is displayed each time one
complete program is output.
After all the specified machining programs
are output, EOR is output. EOR is not output
for individual program output.
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
output of the first
CAUTION
To prevent influence from data omission and data transformation in the communication
circuit, always verify the data after inputting and outputting machining programs.
search engine
2.6 Data In/Out
program is
O100;
I - 143
ALL