Mitsubishi Electric MELDAS C6 Instruction Manual page 51

(1) TIME setting
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
Set the number, hour, minute, and second corresponding to the TIME to be set.
Set 3 in # ( ).
Set 0 in DATA ( ) (
Press the key.
INPUT
DATE : Set date (set "YEAR" in the Christian Era).
TIME : Set time in 24-hour mode.
POWER ON : Total integrating time of the time from control unit power ON to OFF.
AUTO OP : Total integrating time of the machining time from AUTO STL button pressed in
the memory mode to M02/M30 or reset button pressed.
AUTO STL : Total integrating time during automatic starting from AUTO STL button pressed
in the memory mode or MDI to feed hold stop, block stop, or reset button
pressed.
EXT TIME 1 : Dependent on PLC sequence.
EXT TIME 2 : Dependent on PLC sequence.
(Note) Integration time (#3 POWER ON to #7 EXT TIME 2): When display reaches the
maximum value (9999:59:59), integration is stopped and the maximum value remains
displayed.
search engine
2.2 Monitor
) ( ).
I - 36