Mitsubishi Electric MELDAS C6 Instruction Manual page 269

Display items
13. Feedrate (FC)
14. Workpiece count
15. Alarm
16. Time
Downloaded from ManualsNet.com
3. Screen Operation When Using a Panel Computer
3.2 NC Monitor Screen (For only the panel computer)
During interpolation feed, the speed in the vector direction currently being
moved in is displayed.
During each axis independent feed, the speed of the axis with the highest
speed is displayed.
The data indicated the counted No. of workpieces is displayed on the left,
and the maximum value (#8003 WRK LIMIT) is displayed on the right.
The code and No. or message regarding the operation alarm, program
error, MCP alarm, spindle alarm, servo alarm or system error is
displayed. Up to four alarms can be displayed.
DATE/TIME The current time and date which are set to NC system are displayed.
The year is displayed in the Christian era. The time is displayed in 24-hour
style.
POWER ON The total time from when the NC power was turned ON until OFF is
displayed.
AUTO OP The total cumulative time for each machining from when the automatic
start button is pressed in the memory mode to when M02/M30 is issued
or the reset button is pressed is displayed.
AUTO STL The total cumulative time during automatic start from when the automatic
start button is pressed in the memory mode to when feed hold stop or
block stop is issued or the reset button is pressed is displayed.
search engine
Details
I - 254