2.6.5.3 Machining Program Merge
To prepare a new machining program by using the machining program contents stored in memory,
one machining program can be followed by a copy of another program. The two programs are
merged into a new program.
Set 3 in # (
order.
(Example 1)
To move program O1001 to the
area following program O1000 for
merge
# ( 3 )
O ( 1 0 0 1 ) → O ( 1 0 0 0 )
Press the
1) Merge is executed and the message
2) When the merge is completed, the
(Example 2) When program O1002 is moved to the area following program O1000 for merge after
Downloaded from
ManualsNet.com
2. Screen Operation of A985GOT
) for the merge command. Set the copy source and destination program numbers in
key.
INPUT
MERGE EXECUTION is displayed in the
message field. It may be terminated in a
moment (when there is less transfer data).
message
MERGE
COMPLETE
displayed in the message field.
operation in Example 1 (previous page), a new program is prepared as shown below.
The three programs are merged into O1000. O1001 and O1002 remain unchanged.
search engine
2.6 Data In/Out
is
I - 161