Change Of Input And Comparison - Mitsubishi Electric MELDAS C6 Instruction Manual

2.6.1.1 Change of Input and Comparison

To perform data input operation, select the IN mode; to perform data comparison operation, select
the COMP mode. Before performing input or comparison operation, check the MODE display to
ensure that the appropriate mode is set.
To change the mode between input and comparison, perform the following:
For example, if the IN mode is selected, "IN" is highlighted.
(Example) Change to the comparison mode.
# ( 1 0 )
DATA ( 2 )
Press the
1) A change is made to the
2) To change to the input mode,
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
key.
INPUT
comparison mode and
word COMP is highlighted.
set 10 in # ( ) and 1 in DATA
( ), then press the
INPUT
key.
search engine
2.6 Data In/Out
the
I - 133