(Refer to "2.3 (I) Tool Offset
(L system)" for L system.
(3) Returning the mode from manual numeric command to usual data setting
Press the
mode returns.
1) The cursor is displayed in first parenthesis
2.3.3 Tool Life
When the menu key
The TOOL LIFE screen consists of the HEAD, NEXT, GROUP LIST screen and TOOL LIFE data
screen.
2.3.3.1 Function Outline
The specifications for TOOL LIFE changes depending on parameter "#1096 T_ Ltype" and "#1103
T_Life" to "#1106 T count". Confirm the explanations described in the appropriate section in setup
parameter.
(1) TOOL LIFE I ("#1096 T_Ltype" = 1)
(2) TOOL LIFE II ("#1096 T_Ltype" = 2)
Downloaded from
ManualsNet.com
2. Screen Operation of A985GOT
. The usual data setting
pairs. After this, usual data setting is enabled.
LIFE
The use time or count of the programmed tool is accumulated and the tool use state is
monitored.
TOOL LIFE II is provided by adding the spare tool selection function to TOOL LIFE I. A spare
tool is selected among programmed tool commands. Tool offset and tool radius compensation
are performed for the selected tool.
search engine
2.3 (II). Tool Offset (M system)
is pressed, the TOOL LIFE screen is displayed.
I - 87