Automatic Operation Pause; Automatic Operation Stop - Mitsubishi Electric MELDAS C6 Instruction Manual

1.4.3 Automatic Operation Pause

The automatic operation pause state means that operation or motion temporarily pauses during
execution of one block during the automatic operation start. The AUTO PAUSE lamp on the machine
operation panel is ON and the AUTO START lamp is OFF.
(1) From automatic operation start to automatic operation pause (transition 7.)
• When the FEED HOLD switch on the machine operation panel is pressed.
• When automatic mode input is out.

1.4.4 Automatic Operation Stop

The automatic operation stop state means that execution of one block is completed and stopped
during automatic operation start. Both the AUTO START and AUTO PAUSE lamps on the machine
operation panel are OFF.
(1) From automatic operation start to automatic operation stop (transition 8.)
• When the SINGLE BLOCK switch on the machine operation panel is turned ON and execution
of the block is completed.
• When the automatic mode input changes to another automatic mode input.
Downloaded from ManualsNet.com search engine
1. Operation State
1.4 Ready
II - 4