2.5.5.2 New Program Registration and Preparation
This function is used to prepare a new machining program.
To prepare a machining program on the EDIT screen, first press the menu key
register the machining program number, then enter the program directly by using the keys.
(1)
Press the menu key
1) The setting area for PROGRAM is
(2)
Set the new registered program
number. A comment can also be
set at the same time if necessary.
(Example)
O ( 1 0 0 0 )
(3)
Press the
1) When the program number and comment
2) At the time, only one character of % is
(4)
Enter the work program in
sequence by using the keys. Key
operation is the same as normal
program edit operation.
(Note 1) To later edit the work program registered in memory by using this function, also call it by
(Note 2) If preparing comment, space (
Downloaded from
ManualsNet.com
2. Screen Operation of A985GOT
MAKE
displayed.
COMMENT ( T E S T )
key.
INPUT
are registered in memory, they are
displayed at the screen top.
automatically registered in memory as
data. Thus, the screen as shown in the
right is displayed.
SEARCH
pressing
after registration for efficient use of memory.
search engine
2.5 Program
.
as with other programs.
) can be written in it. But, the space is ignored
SPASE
I - 130
MAKE
and