Operation Example Of Waveform Display Tool; Real Time Waveform Display - Mitsubishi Electric MELDAS C6 Instruction Manual

3.7.1 Operation Example of Waveform Display Tool

Operation examples of Servo data and Spindle data Waveform Display tool are described below.

3.7.1.1 Real Time Waveform Display

1)
2)
Downloaded from ManualsNet.com
3. Screen Operation When Using a Panel Computer
3.7 Realtime Wave Screen (For only the panel computer)
Press REALTIME WAVE DISP
menu to use Servo data and
Spindle data Waveform Display
tool.
Press Setting menu to display the
data setting screen.
To display the
waveform of
synchronous
tapping error:
CH1: Set as follows
Axis: "X1"(servo axis)
Data: "SpeedFB"
Data/Div: "100"
Offset: "0"
CH2: Set as follows
Axis: "Y1"(servo axis)
Data: "Current"
Data/Div: "100"
Offset: "0"
CH1: Set as follows
Axis: "S1"(spindle)
Data: "Sync-tap err width"
Data/Div: "100"
Offset: "0"
CH2: Set as follows
Axis: "S1"(spindle)
Data: "Sync-tap err angle"
Data/Div: "100"
Offset: "0"
search engine
To display the
waveform of
speedFB and
current command:
I - 295
SpeedFB
Current
Sync-tap err width
Sync-tap err angle