Dry Run; Manual Override; Override Cancel; Optional Stop - Mitsubishi Electric MELDAS C6 Instruction Manual

6.5 Dry Run

(1) When the DRY RUN switch is turned on, the feedrate set by using the MANUAL FEED RATE

6.6 Manual Override

(1) When the MANUAL OVERRIDE switch is turned on, the override value set by using the FEED
(2) The override value also takes precedence over the dry run during automatic operation.
(3) Manual override becomes effective immediately when the switch is turned on.

6.7 Override Cancel

(1) When the OVERRIDE CANCEL switch is turned on, the programmed F command value takes
(2) It is not effective for manual override.

6.8 Optional Stop

(1) If M01 is programmed, the machine automatically stops by turning on the OPTIONAL STOP
(Note) Some processes within the user-PLC are required.
(2) The machine stops after the M01 block is executed.
Downloaded from ManualsNet.com
6. Operation Panel Switch Functions
switch takes precedence over the programmed feedrate (F).
OVERRIDE switch takes precedence over the value set by using the MANUAL FEED RATE
switch.
precedence over the override value set by using the FEED RATE OVERRIDE switch.
switch. When the switch is off, M01 is ignored and the machine does not stop.
search engine
6.5 Dry Run
II - 20