Tool Registration; Outline Of Functions; Tool Registration In The Magazine Pot - Mitsubishi Electric MELDAS C6 Instruction Manual

(Refer to "2.3 (II). Tool Offset
(M system)" for M system.

2.3.6 Tool Registration

The T-REGISTRATION screen will appear when the menu key
screen is changed using the
PLC, so refer to the instruction manual issued by the maker for details.

2.3.6.1 Outline of Functions

(1) Tools used can be registered in the magazine pot.
(2) When the magazine pot and the tool No. are changed by a tool selection command or a tool
replacement command, the new tool No. is displayed.
(3) Random data can be set in AUX (
user PLC.
(4) Tools can be registered in USAGE on the upper portion of the screen. The displayed name and
displayed No. can be changed.
(5) The No. of tool registrations differs according to the specifications, but a max. of 80 tools can be
registered, with a max. of 4 digits in the tool Nos.
(6) Tools can be selected by a manual numerical command.

2.3.6.2 Tool Registration in the Magazine Pot

Set "1" in MG (
"1234" in TOOL (
"2" in D (
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
2.3 (I). Tool Offset (L system)
),
), and
).
search engine
NEXT
key. The use of this screen differs according to the user
) in the setting area and processed as a sequence with the
I - 72
LIFE
is pressed, and the