3.4 Data In/Out Screen (For only the panel computer)
In this screen, various NC data can be input or output between NC memory and user's compact flash
card mounted on the panel computer (Windows® CE). The following data items are the target.
1. Machining programs (including fixed cycle programs)
2. Tool offset data
3. Parameters
4. Common variables
5. Workpiece offset data
6. Maintenance data
7. Operation history
8. MR-J2-CT parameters
The maintenance data is output as binary codes, and the other data is output as ASCII codes or
Shift JIS codes.
1. Part system name
2. NC select button
4. Setting columns
5. Device information
6. File list
Downloaded from
ManualsNet.com
3. Screen Operation When Using a Panel Computer
3.4 Data In/Out Screen (For only the panel computer)
search engine
I - 261
3. Alarm/message column