Mitsubishi Electric MELDAS C6 Instruction Manual page 408

(3) Example of data output operation
Confirm that the user PLC is
stopped.
Connect the output device.
Call out the data output screen.
DIAGN
IN/OUT
1) The data output screen will display.
Group output of data
Set 99 in 9 9 setting area, and
A L L 1 in the data setting
area.
# (99) DATA (
Press
1) The output will start, and the
2) The output operation will end
Downloaded from ManualsNet.com
9.2 Data Input/Output by RS-232C
MENU OUTPUT
(ex.) ALL1: Plain data (Parameter, R register, workpiece offset, backup data.)
ALL1)
.
INPUT
output data No., output data
details, and "DATA
EXECUTION" message
display.
when the end code % (EOR) is
output, and the message "DATA
OUT COMPLETE" displays.
search engine
9. Maintenance Functions
OUT
will
III - 59