Tool Offset (M System) - Mitsubishi Electric MELDAS C6 Instruction Manual

(Refer to "2.3 (I) Tool Offset
(L system)" for L system.
2.3 (II). Tool Offset (M system)
The following menu will display if the function selection key
PARAM menu display(No.1 to 4)
TOOL menu display(No.1 to 4)
BACK
BACK
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
Previous page key
NEXT
NEXT
CAUTION
If a tool offset amount is changed during automatic operation (including during single block
stop), the new offset is validated from the command of the next block or blocks onwards.
search engine
2.3 (II). Tool Offset (M system)
WORK PROCESS
OFFSET REGIST
Menu selection key
I - 76
TOOL
is pressed.
PARAM
I/O PAR SETUP MENU
LIFE MENU
Next page key