Mitsubishi Electric MELDAS C6 Instruction Manual page 179

#
1
2
3
4
5
6
7
8
9
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
Display items
INPUT ATA CARD -> MEMORY
Set # ( 1) to enter the above
mode.
COMP ATA : MEMORY
Set # ( 2) to enter the above
mode.
OUTPUT MEMORY -> ATA
Set # ( 3) to enter the above
mode.
CONT. OUTPUT
Set # ( 4) to enter the above
mode.
ERASE
Set # ( 5) to enter the above
mode.
CHANGE DIR
Set # ( 6) to enter the above
mode.
RENAME
Set # ( 7) to enter the above
mode.
ALL ERASE
Set # ( 8) to enter the above
mode.
FILE
1: ATA 2: MEMORY
Set # ( 9) to enter the above
mode.
search engine
2.6 Data In/Out
The files in the flash ATA card are input into the NC
memory.
Designate the name of a file in the card to be input.
The files in the flash ATA card and the contents of the NC
memory are compared.
Designate the name of the file in the card to be compared.
The contents of the NC memory are output to the flash
ATA card as a file.
The output destination file name can be designated.
When outputting machining programs, set the machining
program No. in the NC and the name of the file in the
output destination card.
Machining programs in the NC memory are continuously
output.
By setting the range of program Nos. to be output in the
setting area, the machining programs with the Nos. in the
designated range will be continuously output.
The files and directories in the flash ATA card are deleted.
Designate the name of the file or directory in the card to
be deleted.
The directory in the flash ATA card is changed or a new
directory is created.
Set the directory name with up to 8 alphanumeric
characters. The name is not case sensitive.
The name of a file in the flash ATA card is changed.
The directory name cannot be changed.
All contents of the flash ATA card, including the directories,
are deleted.
Select whether the files in the flash ATA card or the
machining programs in the NC memory are listed in the
display on the right side of the screen.
I - 164
Details