Mitsubishi Electric MELDAS C6 Instruction Manual page 20

In this screen, the various information which are needed to setup and maintain the machine and
NC system are displayed and set.
When the NC-dedicated display unit is used, refer to the section "2.1 Setting and Display Unit
Operation" and onwards.
1. NC screen area
(1) Display items
1. NC screen area
2. Function switch
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
Display items
The functions such as position monitoring, alarm diagnosis, tool
offset/parameters, and program edit. They have equivalent function as
the screens of NC-dedicated display unit. Note that graphic trace
function and PLC ladder edit function are not provided.
The following keys used to select the display function. These keys are
equivalent to Function Select Key of NC-dedicated display unit.
Key
For switching the NCs being monitored when more
CHG
than one NC is set to be monitored.
For finishing the NC monitoring function.
END
Selects position monitoring function.
MONITOR
Refer to "2.2 Monitor".
Selects alarm diagnosis function or data input/output
DIAGN
function.
IN/OUT
Refer to "2.7 Diagnosis" and "2.6 Data In/Out.
Selects tool offset function and parameter setting.
TOOL
PARAM
Refer to "2.3 Tool Offset" and "2.4 Parameters".
Selects program edit function. Refer to "2.5 Program".
EDIT
MDI
Selects APLC release screen.
F0
search engine
Details
Description
I - 5
2. Function switch
3. Menu
4. Key board
During
communication
error
Valid
Invalid