Mitsubishi Electric MELDAS C6 Instruction Manual page 172

(3) To erase all machining programs registered in memory
Set "CLR" in DATA (
# (
DATA ( C L R )
1) No value needs to be entered in # (
Press the
1) All machining program erase is executed
Check the PROGRAM FILE
screen.
1) PROGRAM ENTRY is set to 0 and
2) CHARACTER is set to 0 and REMAIN is
3) The PROGRAM FILE screen becomes
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
To erase all of machining programs 1~99999999 registered in memory, perform the following:
).
)
key.
INPUT
and terminated almost in a moment. The
message ERASE COMPLETE
displayed in the message field and the
data setting area becomes blank.
REMAIN is set to the maximum number
of programs defined in the specifications.
set to the maximum number of stored
characters defined in the specifications.
The number of programs and the
number of characters are as listed below
according to the specifications:
Tape storage Number of Number of
length programs characters
40m 64
80m 128
160m 200
320m 200
600m 400
1280m 1000
2560m 1000
5120m 1000
blank, indicating that no programs are
registered.
search engine
2.6 Data In/Out
).
is
17500
32000
64000
128000
236250
512000
1024000
2048000
I - 157