Mitsubishi Electric MELDAS C6 Instruction Manual page 271

(2) Select a part system
1)
Press the part system select
button.
(Ex.) Press $1.
2)
Select the part system to be
displayed from the pull-down
menu.
(EX.) Select "$3".
(3) Closing the pull-down menu without changing settings
To close the pull-down menu to select an NC or a part system without changing current setting,
perform one of the following operations:
• Press the same button which was pressed to display the pull-down menu.
(NC select button or part system select button)
• Select the same name (NC or part system) as that displayed currently.
• Touch the panel wherever but outside of the pull-down menu.
• Press the other button (NC or part system).
• Change the screen with the screen select menu.
Downloaded from ManualsNet.com
3. Screen Operation When Using a Panel Computer
3.2 NC Monitor Screen (For only the panel computer)
→
The pull-down menu which has been displayed will close and a new pull-down menu will
appear according to the pressed button.
→ The pull-down menu will close and the selected screen will appear.
search engine
A pull-down menu to select a part system will
appear.
The information for the 3rd part system will
appear.
I - 256