Operator Messages - Mitsubishi Electric MELDAS C6 Instruction Manual

7.9.2 Operator Messages

The following messages indicate the status of the setting and display functions‚ and are not operation
errors. They are mainly used to show that operation is normal‚ and serve as guides for the following
operations. There is no classification by numbers.
(1) Search and operation related
SEARCH EXECUTION
SEARCH COMPLETE
(2) MDI/editing related
MDI NO SETTING
MDI SETTING COMPLET
MDI ENTRY COMPLETE
MDI RUNNING
PUSH KEY SEARCH/PROG • Status in which no programs to be edited have been called on
EDITING
EDIT (REP.)
EDIT (INS.)
EDIT (CAN'T INSERT)
EDIT (CAN'T REPLACE)
Downloaded from ManualsNet.com
7.9 Operation Messages on Setting Display Unit
Message
Message
search engine
7. List of Alarms
Message details
• Search is being executed normally.
• Search was completed normally.
Message details
• Only display of MDI data (no execution)
• The MDI data setting has been completed (execution is now
possible).
• The MDI data was saved in the memory with the specified
program No.
• The NC is operating with an MDI program‚ and the MDI data
cannot be corrected.
the editing screen. To edit‚ press the SEARCH or PROGRAM
edit key.
• The details of a program are being edited on the screen. Press
INPUT to write the data in the memory.
• The program can be edited on the screen in the replace mode.
• The program can be edited on the screen in the insert mode.
• The data can be inserted no more because of the shortage of
space area while editing the program on the screen with insert
mode. Cancel the insertion-impossible state by moving a cursor
and release some data area.
• The data can be replaced no more since the cursor reached the
end of editing area while editing the program on the screen with
replace mode. Cancel the replace-impossible state by cursor,
DEL key, or C•B/CANCEL.
IV - 66