Mitsubishi Electric MELDAS C6 Instruction Manual page 474

Error No.
0014
0015
0016
0032
0037
0039
00C8
0101
0102
Downloaded from ManualsNet.com
Details
The designated attributes are not
supported.
The service provided an unexpected
volume of data.
The designated object does not exist in the
slave.
The response data format is illegal.
The designated slave station No. is not
within 0 to 63.
The split response order is illegal.
The parameters are not set for the
designated slave.
The set data length exceeds 241.
An illegal value was set for the command
No. in the message communication
command area.
search engine
7. List of Alarms
7.8 Communication Error
•
•
•
•
•
•
•
•
•
•
•
IV - 58
Remedy
Check that the designated MAC ID,
class ID, instance ID and attribute ID
are correct.
Referring to the slave manual, check
the conditions for the slave to notify this
error, and remedy accordingly.
The data returned by the slave must be
240 bytes or less.
Check that the designated MAC ID,
class ID, instance ID and attribute ID
are correct.
Referring to the slave manual, check
the conditions for the slave to notify this
error, and remedy accordingly.
Generally check the state of the
network and slave, and confirm that the
terminator is not disconnected, etc.
Designate a value between 0 and 63.
Generally check the state of the
network and slave, and confirm that the
terminator is not disconnected, etc.
Designate a slave for which the
parameters have been set.
The data length must be 240 or less.
Set 0001H, 0101H, 0102H or 0201H for
the command No.