(Refer to "2.3 (II). Tool Offset
(M system)" for M system.
2.3.1 Wear Data
The TOOL TIP OFFSET screen will appear when the menu key
Set the nose wear for each tool used. When the tool compensation No. is designated by the tool
command (T command), compensation is carried out matching the tool length of the next screen.
Downloaded from
ManualsNet.com
2. Screen Operation of A985GOT
2.3 (I). Tool Offset (L system)
search engine
T-OFSET
X axis offset
X axis tool length offset + X axis wear
offset
Z axis offset
Z axis tool length offset + Z axis wear
offset
C axis offset (additional axis)
C axis tool length offset + C axis wear
offset
Data
X
X axis tool nose wear compensation
Z
Z axis tool nose wear compensation
Additional axis tool nose wear
C
compensation
I - 47
is pressed.
Function