Mitsubishi Electric MELDAS C6 Instruction Manual page 131

(3) Edit program call
(4) Large-size mode/small-size mode
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
To edit a program on the EDIT screen, first press the extension operation menu key
MAKE
or . To edit an already stored program in memory, press
program in memory, press
Once the program edit operation begins, the operation is as follows: If another function screen
is operated during program edit operation and then the EDIT screen is reselected, the
previously edited data will be displayed. In the following cases, the system enters the status in
which nothing has been called. Thus, retry data search before edit operation.
• The program being edited on the EDIT screen is condensed by the condense function. The
EDIT screen is then selected.
• The program being edited on the EDIT screen is merged with another program by the
merge function. The EDIT screen is then selected.
The EDIT and MDI screens can be switched between the large-size and small-size modes.
Large-size mode
In large-size mode, data search and program creation are enabled.
The FILE menu is not available; refer to the data input/output program list to check the stored
programs.
(Note 1) Switching the mode in the EDIT screen automatically changes the mode in the MDI
screen.
(Note 2) During editing (while message EDITING is displayed on the lower right of the screen),
LARGE
menu keys
the mode. To change the mode, the
(Note 3) The mode thus set is held after the screen is changed or after power is turned off.
search engine
2.5 Program
MAKE
. For details, see 5.5.
SMALL
and are disabled, i.e., pressing it does not change
INPUT
I - 116
SEARCH . To store a new
Small-size mode
key must be pressed to end editing.
SEARCH