Axis Parameters - Mitsubishi Electric MELDAS C6 Instruction Manual

2.4.2.3 Axis Parameters

#
8201 AX. RELEASE
8202 OT-CHECK OFF
8203 OT-CHECK-CANCEL When the simple absolute position method ("#2049
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
Items
Select the function to remove the control axis from
the control target.
0: Control as normal
1: Remove from control target
Select the stored stroke limit II function set in
#8204 and #8205.
0: Stored stroke limit II valid
1: Stored stroke limit II invalid
type" is 9), the stored stroke limit I, II (or IIB), IB
will be invalid until the first reference point return is
executed after the power is turned on.
0: Stored stroke limit valid (according to
1: Stored stroke limit invalid temporarily
(Note) The setting of this parameter (#8203)
search engine
2.4 Parameters
G60 SHIFT 0.000
OT INSIDE
Details
#8202)
affects all of the stored stroke limits.
I - 102
0.000 0.000 0.000
0 0 0 0
Setting range (unit)
0/1
0/1
0/1