Mitsubishi Electric MELDAS C6 Instruction Manual page 162

(3) Data format
Address
1) Common parameter (one data item per one # number)
2) Axis parameter
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
The data format is as follows:
Definition
N Parameter number
A Axis number
T Part system number For data per part system, the part system number is indicated by
P Parameter data
C Spindle Number
The following types of data format are used according to parameter type and display method.
(The address order in one block must use the following format.)
N1084P0. 001 ;
Parameter # number
(1) The output parameter setting value is the same format as the screen display.
N2001A1P10000 ;
Axis number
# number on screen
(a) When multiple axes are displayed on one screen
The parameter data for when the parameters for multiple axes are displayed on one screen
are output per axis.
[Output example]
:
N2001A1P12000 ;
N2002A1P4000 ;
N2003A1P21 ;
:
N2001A2P12000 ;
N2002A2P4000 ;
N2003A2P21 ;
:
search engine
2.6 Data In/Out
The parameter # number is indicated by the value following "N."
For axis data, the axis number is indicated by the value following
"A".
The 1st axis is indicated as "A1".
the value following "T".
(1st part system: T1, 2nd part system: T2, PLC axis: T3)
The parameter data is indicated by the value following "P".
For spindle data, the spindle number is indicated by the value
following "C".
(ex.) 1st spindle: C1
Note that this expression is available only when two or more
spindles are used.
Parameter setting value
Parameter setting value
Axis 1 data
Axis 2 data
I - 147
Details