Mitsubishi Electric MELDAS C6 Instruction Manual page 415

(4) Select the operation (input/output/comparison)
s : Eight or less alphanumeric setting, extension (may not include extension in some cases)
n : Data type No. (100 to 149, 150 to 199 200 to 231, 250 to 299)
k : Character string set in 3rd setting area at "#10 DATA" (ALL1, ALL2, ALL3, data type No.)
Operation
Input (#1)
Compare
(#2)
Output (#3)
(Note) An "x" of "ALLx" or ".ALx" indicates one of 1, 2, or 3.
Downloaded from ManualsNet.com
9.3 Data Input/Output Using Flash ATA Card
# (10) ( 99) (
Basic setting When k is "ALLx"
When k is "data type No."
Single file #( 1) (
designation
#( 1) (
#( 1) (
Basic setting When k is "ALLx"
When k is "data type No."
Single file #( 2) (
designation
#( 2) (
#( 2) (
Basic setting When k is "ALLx"
When k is "data type No."
Single file #( 3) (
designation
#( 3) (
#( 3) (
search engine
9. Maintenance Functions
k)
Setting method
s) ( ) When k is "ALLx", the files s.ALx in the ATA card
are input to the NC memory.
n) ( ) When k is "data type No.", the files n.MNT in the
ATA card are input to the NC memory.
) ( ) When k is "data type No.", the files k.MNT in the
ATA card are input to the NC memory.
s) ( ) When k is "ALLx", the files s.ALx in the ATA card
are compared with the data in the NC memory
n) ( ) When k is "data type No.", the files n.MNT in the
ATA card are compared with the data in the NC
memory.
) ( ) When k is "data type No.", the files k.MNT in the
ATA card are compared with the data in the
memory.
s) ( ) When k is "ALLx", the maintenance data in the NC
memory is output as the file s.Alx in the ATA card.
n) ( ) When k is "data type No.", the maintenance data
with the data type is output as the file n.MNT in
the ATA card.
) ( ) When k is "data type No.", the maintenance data
with the data type is output as the file k.MNT in the
ATA card.
III - 66
: # ( 1) (File name in ATA card) (
: # ( 1) (File name in ATA card) (
: # ( 2) (File name in ATA card) (
: # ( 2) (File name in ATA card) (
: # ( 3) (File name in ATA card) (
: # ( 3) (File name in ATA card) (
)
)
)
)
)
)