Mitsubishi Electric MELDAS C6 Instruction Manual page 268

Display items
7. Program position
8. Manual interrupt
amount
9. Machining program
currently being
executed
10. G command modal
11. F command modal
12. S, M, T, B
command modal
Downloaded from ManualsNet.com
3. Screen Operation When Using a Panel Computer
3.2 NC Monitor Screen (For only the panel computer)
[Current position] – Tool compensation amount = [Program position]
This displays the value obtained by subtracting the tool offset amount for
that axis from the position actually being executed for each axis.
This displays the amount moved with the manual mode while the manual
absolute switch was OFF.
[MAIN] O ··· This displays the program No., sequence No. and block No. currently
being executed.
[SUB] O ··· When executing a subprogram, the subprogram program No., sequence
No. and block No. are displayed.
(PROGRAM) The details of the machining program currently being executed are
displayed.
The characters of the block being executed are displayed in blue.
The state of the G command modal currently being executed is displayed.
The G command modal displayed differs depending on the model (lathe/
machining center).
G01···G94··· The state of the G command modal currently being executed is displayed.
G41: The tool radius offset modal is displayed.
D1 Offset No.
=30.000: Shape offset amount for tool radius
0.040 Tool radius wear amount
G43: The tool length offset modal is displayed.
Z Offset axis name
H20 Offset No.
=250.500: Offset amount
0.240 Tool length wear amount
FA The program command F modal value currently being executed is
displayed.
FM The manual feedrate is displayed.
FS The synchronous feedrate is displayed.
FE The thread cutting feedrate is displayed.
S The program command S modal value currently being executed is
displayed.
( ) The value in parentheses indicates the actual spindle rotation speed.
When the 2nd spindle is used, the modal value for the 2nd spindle is also
displayed.
The program command M modal value (max. four sets) currently being
M
executed is displayed.
T The program command T modal value currently being executed is
displayed.
B The program command 2nd miscellaneous function modal value currently
being executed is displayed.
search engine
Details
I - 253