Mitsubishi Electric MELDAS C6 Instruction Manual page 233

Display items of the <OPE> area
[J] Ope. test mode
[M] Ope. mode
[P] Paramete set
[S] Scale
[Z] Abs. Pos. init.
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
Item
This displays the VALID/CANCELED status of the operation adjustment
mode.
This item is highlighted when the mode is valid.
The operation mode of the current auxiliary axis is displayed in the column
to the right of the item.
(Display details of the operation mode)
AUTOMATIC
JOG
STEP
MANUAL
HANDLE
Zero-P.Ret
"Operation parameter group" means a series of MR-J2-CT parameters as
shown below.
Parameter name
Aspeed1-4
Mspeed1-4
time1.1-4.1
time1.2-4.2
TL1-4
OD1-4
just1-4
near1-4
There are 4 sets of these parameters, and the operation keys are used to
changeover between them.
The current operation parameter group No. is displayed in the column to the
right of the item.
Operation parameter
Display details
When the operation mode is the incremental or handle mode, the setting
details are displayed in the column to the right of the item.
This column is empty when the operation mode is another mode.
(Display details during the incremental mode)
The feed amount per startup is displayed.
Feed amount
Display details
(Display details during the handle mode)
The handle rotation magnification is displayed.
Rotation
magnification
Display details
This shows the initialization selected/not selected status of the absolute
position.
This item is highlighted when initialization is selected.
search engine
2.7 Diagnosis
Display details
: In automatic operation mode
: In JOG operation mode
: In incremental mode
: In manual operation mode
: In handle mode
: (dog-type return only) In refetence point return mode
Parameter No.
#150,158,166,174
#151,159,167,175
#152,160,168,176
#153,161,169,177
#154,162,170,178
#155,163,171,179
#156,164,172,180
#157,165,173,181
1
group item
1
1° 1/10°
1/1 1/10
1 10
1 10
I - 218
2 3 4
2 4 4
1/100° 1/1000°
1/100 1/1000
100 1000
100 1000