Setup/Maintenance Screen (For Only The Panel Computer) - Mitsubishi Electric MELDAS C6 Instruction Manual

3.5 Setup/Maintenance Screen (For only the panel computer)

In this screen, the various information which are needed to setup and maintain the machine and
NC system are displayed and set.
When the panel computer is used, SETUP/MAINTENANCE screen appears.
When the NC-dedicated display unit or A985GOT is used, refer to the section "2.1 Setting and
Display Unit Operation" and onwards.
NC screen area
(1) Display items
1. NC screen area
2. Menu area1
3. Menu area2
4. Key board
5. Menu area3
Downloaded from ManualsNet.com
3. Screen Operation When Using a Panel Computer
3. 5 Setup/Maintenance Screen (For only the panel computer)
Display items
The functions such as position monitoring, alarm diagnosis, tool
offset/parameters, and program edit. They have equivalent function as
the screens of NC-dedicated display unit. Note that graphic trace
function and PLC ladder edit/monitor function are not provided.
The following keys used to select the display function. These keys are
equivalent to Function Select Key of NC-dedicated display unit.
Selects position monitoring function.
MONITOR
Refer to "2.2 Monitor".
Selects alarm diagnosis function.
DIAGN
IN/OUT
Refer to "2.7 Diagnosis".
Selects tool offset function and parameter setting.
TOOL
PARAM
Refer to "2.3 Tool Offset" and "2.4 Parameters".
Selects program edit function.
EDIT
MDI
Refer to "2.5 Program".
Changes a screen according to menu.
MENU 1 to 5
If the NC-dedicated display is valid, the "KEY OPERATION INVALID"
message and OPERATE menu will appear.
Displays the previous page if there are multiple pages in a screen.
BACK
Displays the next page if there are multiple pages in a screen.
NEXT
This is used to set a data in NC screens.
Refer to "(2) Composition of displayed keyboard" for details.
Displays the other screen by the panel computer.
search engine
Details
I - 278
2. Menu area 1
3. Menu area 2
4. Key board
5. Menu area 3