Manual Absolute - Mitsubishi Electric MELDAS C6 Instruction Manual

6.10 Manual Absolute

When the MANUAL ABSOLUTE switch is turned on, the program coordinate system is updated by
manual tool move distance. If the switch is off, the program coordinate system is updated by manual
tool move distance.
Downloaded from ManualsNet.com
6. Operation Panel Switch Functions
W
Feed hold stop
Passes through the same path as program.
-Y
When MANUAL ABSOLUTE Switch is ON
W
Feed hold stop
Path is shifted by manual interrupt value.
(Origin (zero) is moved.)
-Y
When MANUAL ABSOLUTE Switch is OFF
(Note) Normally, the switch will be "ON" if there is no manual absolute switch. Depending on the
machine, the switch may be "OFF" so check the specifications issued by the machine
manufacturer.
search engine
6.10 Manual Absolute
X
Path on program (absolute command)
Manual interrupt
(Program coordinate system is updated
by tool move distance.)
Starts after manual interrupt
Path on program (absolute command)
Manual interrupt
(Program coordinate system is not updated
even if the path was changed.)
Path after manual interrupt
II - 22
X