(3) Precautions at connecting with both the NC-dedicated display unit and the panel computer
Downloaded from
ManualsNet.com
3. Screen Operation When Using a Panel Computer
3. 5 Setup/Maintenance Screen (For only the panel computer)
A message appears on the panel computer ' s title bar and menu area 2 when an NC-
dedicated display unit is connected. The menu keys and the keys on the panel computer ' s
keyboard such as data setting keys and special keys became invalid. The keys pressed on
an NC-dedicated display unit or the other display unit are valid. To validate the key
operations on the panel computer, press the OPERATE menu.
Screen select keys on the bottom of the screen such as NC MONITOR and
2-SYSTEMS MONITOR are available.
1)
Connect with NC-dedicated
display unit.
2)
Press the OPERATE menu.
search engine
A message will appear on the displayed
keyboard of SETUP/MAINTENANCE
screen. Menu keys and keys of data setting
keys and special keys are invalid.
Part systems cannot be changed while the
key operation is invalid.
(Only for SETUP/MAINTENANCE screen.)
Key operations with this display unit (the
panel computer) will be enabled.
If the OPERATE menu is pressed on
another display unit, that display unit will be
validated.
I - 280