Data Output - Mitsubishi Electric MELDAS C6 Instruction Manual

2.6.2 Data Output

Pressing the menu key
The DATA OUTPUT screen allows the operator to output user-created machining programs (main
program and subprogram), tool offset data, parameters, common variables and history data that
have been stored in memory.
#
1
2
3
5
28
30
60
11
12
(Note 1) To output a fixed cycle program, set the parameter.
(Note 2) If the data protection, edit lock B, or edit lock C condition is set, data may not be output.
Output method
Specifying individual
machining programs
Specifying ALL
Specifying a range
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
OUTPUT
Item
MAIN PROGRAM (Note 1)
TOOL DATA
PARAMETER
COMMON VARI
AUX-PARA
MACRO PROGRAM
TRACE DATA
PORT NO.
DEVICE NO.
See Appendix 2 "Registering and Editing Fixed Cycle Programs".
For the details, see the descriptions in "Data protection" and "Edit lock".
Output inhibit
Data protection key ON
condition
Machining programs,
tool data, parameters
No data is output.
No data is output.
search engine
2.6 Data In/Out
displays the DATA OUTPUT screen.
[DATA OUTPUT]
<LOCK>
# 1 MAIN PROGRAM
# 2 TOOL DATA
# 3 PARAMETER
# 5 COMMON VARI
#30 MACRO PROGRAM
<OUTPUT DATA>
#( ) DATA(
INPUT OUTPUT
The types of data that can be output are as follows.
(1) Used to output a machining program.
(2) Used to output tool data.
(3) Used to output parameter data.
(4) Used to output a common variable.
(6) Used to output an auxiliary
(6) Used to output a macro program.
(7) Used to output history data.
The I/O port number and device number required to output data
are set.
If they are already set on the I/O BASE PARAM screen, the setup
values are displayed on the DATA OUTPUT screen. They may
be changed on either screen.
Edit lock B ON
Machining programs
8000 to 9999
Machining programs O8000
to 9999 are not output.
Machining programs other
than O8000 to 9999 are
output.
I - 140
IN/OUT 2
OFF #11 PORT
OFF #12 DEVICE
OFF (FDD:9600bps)
#28 AUX-PARA
#60 TRACE DATA
#99 MAINTENANCE
) ( )
ERASE FILE
Explanation
.
axis parameter data
Edit lock C ON
Machining programs
9000 to 9999
Machining programs O9000
to 9999 are not output.
Machining programs other
than O9000 to 9999 are
output.
No.2
No.1
MENU