Setting Workpiece Coordinate System Offset Data; Setting External Workpiece Coordinate System Offset Data; Displaying Machine Position Data - Mitsubishi Electric MELDAS C6 Instruction Manual

2.4.1.1 Setting Workpiece Coordinate System Offset Data

(1) Enter the number corresponding to the workpiece coordinate system in # ( ), put offset data in
(2) The workpiece coordinate system offset data thus defined is then displayed at the position of
(3) The number displayed in # ( ) is incremented and decremented by one when pressing the
(4) Typing

2.4.1.2 Setting External Workpiece Coordinate System Offset Data

By measuring the coordinate system deviation with an external touch sensor, etc., all workpiece
coordinate systems G54 to G59 can be offset.
External workpiece coordinate system data can be defined in one of two ways: inputting external
data directly to the external offset (EXT) or entering it into the setting field on the screen (EXT).
The setting method is the same as for workpiece coordinate system offset data.

2.4.1.3 Displaying Machine Position Data

As with the POSITION screen, data of each axis displayed at the [MACHINE] on the WORK
OFFSET screen indicates the current machine position in reference to the zero point on the basic
machine coordinate system; it cannot be changed on this screen.
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
DATA ( ), then press the
data.
the workpiece coordinate system and the number in # ( ) changes to the next setting number
and the data in DATA ( ) disappears.
arrow keys
.
I in # ( ) and pressing the
mode. Data set in the incremental mode is added to the displayed data.
Typing A in # ( ) and pressing the
restores the absolute mode.
search engine
2.4 Parameters
key. This defines workpiece coordinate system offset
INPUT
key puts the setting mode to the incremental
INPUT
key cancels the incremental mode and
INPUT
I - 97