2.6.6.1 Outline of Operation Procedure
The outline of the operation procedures is explained below.
Refer to section "2.6.6.2 List of Input/Output Operations" for details on the setting format for each
operation.
Refer to the section following "2.6.6.3 Input/Compare" for examples of actual operations.
(Example) Input the file "10" in the flash ATA card directory "BACKUP" into the NC memory as the
(1) Select the directory in the flash ATA card. (#6)
To select data in the NC memory, change the list display with "#9 FILE".
(2) Select the target data. (#10) -> Refer to "2.6.6.2 List of Input/Output Operations".
(3) Select the function. (#1 to 8) -> Refer to "2.6.6.3 Input/Compare" and following sections.
(4) Check that the operation has ended correctly.
Downloaded from
ManualsNet.com
2. Screen Operation of A985GOT
No. 10 machining program.
Change the directory to "BACKUP".
# ( 6) (
BACKUP) (
Select the target data (machining
program)
# (10) (
1) (
Input file "10" as machining program "10".
(flash ATA card → memory)
# ( 1) (
10) (
List the machining programs in the NC
memory and check.
# ( 9) (
2) (
search engine
2.6 Data In/Out
The files in the directory "BACKUP" will
appear in the list.
)
INPUT
"1: PROGRAM" at "#10 DATA" will be
highlighted.
)
INPUT
Input from the flash ATA card will start.
)
INPUT
The No. of the machining programs
registered in the NC memory will
appear.
)
INPUT
When the input is completed, machining
program "10" will be added to the list.
I - 169