Machining Program Output - Mitsubishi Electric MELDAS C6 Instruction Manual

2.6.2.1 Machining Program Output

To output user-prepared machining programs, perform the following:
(1) When only one machining program is output
(2) When all machining programs are output
(Note 1) When all data of one machining program is output, % is displayed. Note that % is not
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
Specify machining program data type #1 and the number of the program to be output.
Set the data type and program
number.
(Example)
To output program O1000
# ( 1 ) DATA ( )
Press the key.
INPUT
1) Data output is started.
To output all machining programs registered in memory in batch, specify machining program
data type #1 and ALL in DATA (
Set 1 in # ( ) and ALL in DATA
( ).
# ( 1 ) DATA ( A L L )
Press the key.
INPUT
displayed each time individual data items are output.
search engine
2.6 Data In/Out
).
All programs are output in the
program number ascending order.
I - 142