Program Copy; Machining Program Copy - Mitsubishi Electric MELDAS C6 Instruction Manual

2.6.5 Program Copy

When the menu key
Copy, condense, merge, and number change of user-prepared machining programs (main program
and subprogram) can be performed on the PROGRAM COPY screen.

2.6.5.1 Machining Program Copy

A machining program selected among work programs registered in memory can be copied as
another program having a different program number. The source program remains intact.
Set 1 in # ( ) for the copy command. Set the program number of the copy source program and the
program number of new program.
(Example)
To copy program O1000 into
O2000
# ( 1 )
O ( 1 0 0 0 ) → O ( 2 0 0 0 )
Press the
1) A copy is started and the message
2) When the copy is complete, the
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
COPY
key.
INPUT
COPY EXECUTION is displayed in the
message field. It may be terminated in a
moment (when there is less copy data).
message COPY COMPLETE is
displayed in the message field.
search engine
2.6 Data In/Out
is pressed, the PROGRAM COPY screen is displayed.
ATA
I - 159