Common Variable Setting; Common Variable Data Deleting - Mitsubishi Electric MELDAS C6 Instruction Manual

2.2.6.2 Common Variable Setting

(1) Common variable data setting
(2) Setting variable names of common variables #500~#519
(3) If the
(4) If a variable number and data (or variable name) not listed on the selected page are set, when
(5) Whenever the

2.2.6.3 Common Variable Data Deleting

To delete all data set as common variables at a time, press the
INPUT
In this case, data on the other screens are not deleted. If all data on all screens are desired to be
deleted, repeat the above operation for all screens.
When
pressed, the variable data is deleted. This delete operation causes the common variable data to be
"null".
(Note) If parameter "#1128 RstVC1" is ON, the common variable data will be cleared to "null" when
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
To set common variable data, set the variable number in # ( ) and common variable data in
DATA ( ), then press the
To set a variable name, set the variable number in # ( ) and the variable name in NAME ( ),
then press the
INPUT
setting. The variable name is a string of up to seven alphanumeric characters beginning with an
alphabetic character.
If both data and variable names are set for variable numbers (#500~#519), the data and
variable name can be set at a time.
key is pressed after the variable number and data (or variable name) are set,
INPUT
the setup data (or variable name) is displayed at the variable number position. The variable
number in the setting area # ( ) is automatically incremented (to the next number) and the
contents of DATA ( ) and NAME ( ) disappear.
the key is first pressed, the screen is changed to the page corresponding to the
INPUT
setup variable number. If again the
set and displayed at the position of the corresponding variable number.
or
variable number can be incremented or decremented by one.
key. This deletes the data displayed one screen.
CAN
SHIFT keys are pressed, only the display is deleted. When the
C.B.
the system is reset. If parameter "#1129 PwrVC1" is ON, the common variable data will be
cleared to "null" when the power is turned ON.
search engine
2.2 Monitor
key.
INPUT
key. Only 20 common variables #500~#519 allow variable name
key is pressed, the data (or variable name) is
INPUT
key is pressed for the variable number displayed in # ( ), the
I - 42
CAN
SHIFT keys, then press the
C.B.
key is then
INPUT