Mitsubishi Electric MELDAS C6 Instruction Manual page 180

#
10
Selecting the input/output maintenance data
3rd setting area
ALL1
ALL2
ALL3
Individual data No.
Blank
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
Display items
DATA
# (10) ( ) (
1 MACHINING PROGRAM
2 TOOL
3 PARAMETER
5 COMMON
28 AUX-PARA
60 TRACE DATA
99 MAINTE
<IN/OUT DATA>
<COMP DATA>
Type of input/output maintenance
System data
File data
PLC program
Individual data
(including No.150 to 199 and No.251)
All ALL1 to ALL3
search engine
2.6 Data In/Out
• Select the data to be input or output.
) The file name extension is shown in the parentheses at
the right of the data type.
• As shown on the left, set "10" in the first setting area
and the number of the data to be selected in the second
setting area.
1: Input/output machining programs
(Fixed cycle programs can be input/output when the
base specifications parameter "#1166 fixpro" is
valid.)
(.OFS) 2: Input/output tool offset data
(.PRM) 3: Input/output parameter data
(.VAR) 5: Input/output common variable data
(.PRA) 28: Input/output auxiliary axis parameter data
(.TRC) 60: Input history data
99: Input/output maintenance data
# (10) ( 99) (
When inputting, comparing or outputting the data, the
symbols " → ", " →→ " and " →→→ " will appear sequentially
in <IN/OUT DATA>
If the comparison mismatches, the data will appear in
<IN/OUT DATA> and <COMP DATA>.
data
No.100 to 149
No.200 to 231
No.250, No.252 to 299
I - 165
Details
)
↑
Refer to table below
Extension
.AL1
.AL2
.AL3
.MNT
.ALL