Mitsubishi Electric MELDAS C6 Instruction Manual page 106

(Refer to "2.3 (I) Tool Offset
(L system)" for L system.
L-CMP
R-CMP
AUX
LIFE
USE
(Note) The No. of uses/No. of mounts depends on the model.
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
Display item
These depend on the data format specified in FORM. Compensation
This depends on the machine manufacturer
specifications.
Life of each tool. It is displayed in the use time
(minutes), mount count (the number of times the tool
has been mounted on the spindle), or work count (the
number of times drilling has been performed) as
specified in FORM.
If it is set to 0, life infinity is specified.
Use data of each tool is displayed in the form as
specified in FORM (a. Tool life control mode).
(Note) Use data is not counted during machine
search engine
2.3 (II). Tool Offset (M system)
Explanation
lock, miscellaneous function lock, dry run,
or single block mode.
I - 91
Setting range
number:
1 to 400
Addition
compensation
amount:
±1 to 99999.999
Direct compensation
amount:
±1 to 9999.999
0 to 65535
Use time:
0 to 4000 (min)
Mount count:
0 to 9999 (times)
Work count:
0 to 9999 (times)
Use time:
0 to 4000 (min)
Mount count:
0 to 9999 (times)
Work count:
0 to 9999 (times)